How to Install a Washing Machine

So you want to know how to install a washing machine. Installing a washing machine in the UK is a straightforward process that can be done with some basic tools and a little bit of know-how and no need for a plumber. Here are the steps to follow:

1. Choose a location: Choose a location for your washing machine that is close to a water supply and a drain. The machine should be level and on a solid floor, to prevent it from vibrating or moving during use.
2. Turn off the water supply: Turn off the water supply to the washing machine by shutting off the valves under the sink or behind the washing machine.
3. Connect the water supply: Connect the hot and cold water supply hoses to the back of the washing machine. The hot water hose is usually red, and the cold water hose is usually blue. Tighten the hoses with a wrench or pliers.
4. Connect the drain hose: Connect the drain hose to the back of the washing machine and then insert it into a standpipe or connect it to a waste trap. Make sure that the hose is secured in place with a hose clip.
5. Plug in the machine: Plug in the washing machine to a nearby electrical socket, making sure that the socket is grounded and that the voltage matches the voltage rating of the washing machine.
6. Turn on the water supply: Turn on the water supply and check for any leaks around the water connections.
7. Level the machine: Use a spirit level to check that the washing machine is level. If it is not, adjust the feet by turning them clockwise or counterclockwise until the machine is level.
8. Run a test cycle: Run a test cycle to make sure that the washing machine is working properly and that there are no leaks or other issues.

There are however services that can do it for you such as the oven cleaners who install appliances and even service them or just re-read how to install a washing machine again to let it sink in.